TVL240 / TVL240S — 4.0T Two-Post Lift
Manual unlock- 5mm+ Q235 steel; chain safety; covered cables
- 2+3-section arms for broad vehicle reach
- CE compliant; dynamic & static load tested
Cap: 4.0T
Thinkcar UK Workshop equipment.
2025 Range
Workshop & Garage Equipment
Premium lifts, tyre & wheel service, EV battery handling, AC and transmission service—engineered for reliability and safety in UK workshops.
Lifting Equipment
Heavy-duty steel, CE compliance, and multi-stage safety systems across two-post, four-post, and scissor platforms.
TVL242A — 4.2T Two-Post Lift
Electric unlock + mech lock- Explosion-proof throttle valve; 24V limit switch
- Reinforced 8mm braided oil lines
- 180kg lock force; high-quality motor & pump
Cap: 4.2T
TVL340 / 340S — 4.0T Clear-Floor
Clear floor- Dual hydraulic cylinders & chain drive
- 5mm steel; detachable sliders; CE certified
- Clean routing for cables and oil lines
Cap: 4.0T
TVL342A — 4.2T Clear-Floor
- Electric unlock with double limit switch
- Pressure-resistant oil lines; 180kg lock force
- 120% dynamic / 150% static load tests
Cap: 4.2T
TVL345ST / 345AT — 4.5T Heavy-Duty
- Direct-drive cylinders with long slides
- Double limit switch; explosion-proof valve
- Built for vans & heavier vehicles
Cap: 4.5T
TVL440 — 4.0T Four-Post Service Lift
- Pneumatic synchronous unlocking
- Adjustable platform spacing
- Front-fixed cylinder design for safety
Cap: 4.0T
TVL450 — 5.0T Four-Post Service Lift
- Square-tube beams; 100% cylinder pressure test
- CE certificate; long platform option
Cap: 5.0T
TVL436 / 436H — 3.6T Parking Lifts
- Manual + short-rope mechanical insurance
- 24V travel limit switch; explosion-proof valve
- Ideal for parking & storage
Cap: 3.6T
TVL635 — 3.5T In-Ground Scissor
- Underground install; adjustable platform length
- Hydraulic + mechanical double safety
Cap: 3.5T
TVL735 — Ultra-Thin Scissor
- No pit required; approach bridges extend deck
- Pneumatic safety lock; manganese arms
Cap: 3.5T
TVL840 — Alignment Scissor
- In-ground; pull-out scissors for long wheelbase
- Integrated base; precise horizontal adjustment
Cap: 4.0T
TVL940 — Ultra-Thin Alignment
- Independent control box; low-voltage control
- Hydraulic + mechanical double-tooth safety
Cap: 4.0T
Specialist Lifting
Purpose-built solutions for EV battery service and heavy vehicles, plus quick-lift floor jacks and secure stands.
TVL515 — EV Battery Pack Lift
- 1.5T capacity with 7° tilt platform
- Fast/slow raise; uniform lowering
- Swivel casters for manoeuvrability
EV Service
TFJ330 / TFJ340 — Dual-Pump Jacks
- 3T & 4T; low-profile quick-lift design
- Magnetic tray; heavy-duty wheels
3T / 4T
TFJ103 / TFJ106 — Jack Stands
- 3T & 6T; thick-gauge steel, anti-slip
- Secure locking; compact storage
3T / 6T
Tyre & Wheel Service
From entry-level changers to fully-automatic run-flat solutions and precision balancers with laser positioning.
TTC633 / TTC633 Pro — Assisted Changers
- Rear / tilt arm with assist
- Up to 26–28″ rims
- Run-flat capable
Pro Workshop
TTC501 / TTC511 — Tyre Changers
- Single / swing arm designs
- 2000–2500 kgf main cylinder
- 3-speed bead shovel
Entry / Mid
TTC733 — Premium Tyre Changer
- Infinitely variable motor drive
- Auto flip head; 3-sec centre lock
- Integrated lift for 75 kg tyres
Premium
TWB501 / 611 / 633 / 733 — Wheel Balancers
- Manual → 3D auto measurement
- Laser positioning & magnetic levitation (select)
- Accuracy to ±1 g
10–30″
ThinkCar 3D Wheel Aligner
- 5 MP cameras; compact targets
- OE database; printable reports
- Moveable locator (select models)
New 2024/5
Maintenance & Service Equipment
Keep jobs moving with dependable service stations, testers and diagnostic support tools.
AC100 / AC200 — A/C Service Stations
- Auto modes with built-in vehicle database
- AC200 supports R134a & R1234yf dual systems
- Integrated printer
A/C Service
TTE780 — Automatic Transmission Oil Changer
- Guided exchange with temperature display
- Electronic scales; visual pressure gauge
ATF
TOR218 / TOR618 — Oil Service Equipment
- 70 L tanks; tempered glass measuring cup
- Full pipe sets; swivel casters
Oil Service
Battery Service
- PPS10 / 30 / 100 smart chargers
- THINKPPS150 programming power supply
- TJS120 / 160 jump starters
12V / 24V
Storage, Workstations & Tooling
Organise your bay with modular storage and complete tool kits for ICE and EV service.
ARW462 — Automotive Repair Workstation
- All-steel modular station with LED lighting & sockets
- Extra-large storage; flexible cabinet combinations
- 4260 × 600 × 2000 mm
Workshop Fit-Out
TTK333 — General Tool Kit
- 333-piece everyday automotive tools
- Heavy-duty slides; self-locking drawers
Service Ready
TTK88 — New Energy Tool Kit
- VDE-insulated; IEC60900-compliant
- Designed for EV & hybrid servicing
High-Voltage Safe
|
THINKCAR GDI 100 is a powerful injector cleaner and tester with enhanced function and more unique integral cabinet and multilingual control panel design. The GDI 100 support different GDI brands in the market, provides complete GDI cleaning and testing solution.
Support Different GDI Brands Supports testing different GDI injectors in the market, including Borch, Denso, Delphi, etc. Supports low resistance injector test, Side-feed injector test, TBI Injector test, Votec Injectors and more |
|
|
THINKCAR AC 100 is an intelligent refrigerant recovery machine developed by THINKCAR. It supports two types of refrigerants, R134a and R1234yf. The Ac 100 integrates the functions refrigerant recovery, filling, vacuuming, and refueling. The unique design with automatic working panel help the technicians and automotive maintenance more professional and simplistic.
|
|
